Correct Cut Intelligent Production Miter Saw Stand
- Correct Cut saves time, money, and material
- "An intelligent miter saw stand for a miter or cutoff saw, the Correct Cut improves the bottom line.
- The portable Correct Cut stand has an integrated and lockable stop connected to a touch screen display
- drastically reduces miss-cut boards due to a misread tape measure which saves the contractor material
- Folded Length is approximately 78", weight is 78 lbs, and Unfolded Length is approximately 12'
Correct Cut saves time, money, and material. "An intelligent miter saw stand for a miter or cutoff saw, the Correct Cut improves the bottom line. " The portable Correct Cut stand has an integrated and lockable stop connected to a touch screen display that provides accurate and real time feedback to the operator of the length and type of cut to be made. This drastically reduces miss-cut boards due to a misread tape measure which saves the contractor materials. A 37% time savings using the Correct Cut instead of the tape measure and circular saw during framing has been demonstrated. Additionally, the Correct Cut does not require the operator to be bent over a bunk of wood to make the cuts thus reducing fatigue. All of these features and benefits translate into an improved bottom line for the contractor. About I was cutting cedar T&G to face 2 garage doors on a miter saw stand with a lockable stop. After completing all the cuts and beginning the install I discovered the stop had moved after cutting about one third of the first door. As a result I had to re-cut almost all of the T&G. I spent $400 for the new cedar, made another trip to the lumber yard, and lost the time re-cutting the T&G. I am sure you can identify with my frustration over this waste! It was at that moment Correct Cut began because there had to be a better way. Along the way we decided to solve more than the issue of a problem stop. We produced a tool that was faster and easier for repeatable cuts. We also saw how costly misread tape measures could be so we eliminated the need to measure each board. In listening to other contractors we found that they wanted a tool that improved finish work as well as framing. The need to simplify crown molding installation and speed up trim out were some of the more common concerns we heard. Correct Cut provides the solutions that contractors and DIYs want. Correct Cut makes your job easier, faster, and more profitable.