JessEm 02313 Rout-R-Lift II 9-1/4-Inch-by-11-3/4-Inch Base for Milwaukee 5615/5616/5619 Series Router

JessEm 02313 Rout-R-Lift II 9-1/4-Inch-by-11-3/4-Inch Base for Milwaukee 5615/5616/5619 Series Router
Brand: JessEm
Product Code: jessem-02313
Availability: In Stock
Price: $189.99
Qty:     - OR -   Add to Wish List
Add to Compare

JessEm 02313 Rout-R-Lift FX 9-1/4-Inch-by-11-3/4-Inch Base for Milwaukee 5615/5616/5619 Series Router

 
  • Rout-R-Lift FX 9-1/4-by-11-3/4-inch base for Milwaukee 5615/5616/5619 series router
  • Provides above-the-table height adjustment and bit changes; accuracy of a JessEm Lift
  • Top plate machined from 3/4-inch thick solid phenolic
  • Includes 1-1/2-inch tab-loc insert ring, insert ring wrench, starter pin, hex key, and hardware
  • Works for 1.75- to 2.5 HP fixed base router motors
 

Product Description

With the increasing popularity of 2HP multi-base router kits, the ROUT-R-LIFT is fast becoming the Ultimate Base for interchangeable 2HP router motors! Available in three carriage sizes for today's most popular 1-3/4HP to 2-1/2HP fixed base router motors. The under carriage is precision machined from premium 6061 aluminum, anodized red and fastened with solid brass fittings. The top plate is CNC machined from 3/4 thick solid phenolic for a perfectly fl at and durable surface. The ROUT-R-LIFT also features our new Cam-Lock Clamp design for quick and easy Plug-N-Rout motor changes. Now 2HP router users can experience the same precision height adjustment and above the table bit changes as our MAST-R-LIFT at a more affordable price. The insert plate center-hole is 3-5/8 in diameter and includes a TAB-LOC insert ring with a 1-1/2 diameter bit hole. Additional insert ring sets are available separately.Rout-R-Lift 9-1/4-by-11-3/4-inch base for Milwaukee 5615/5616/5619 series router. Provides above-the-table height adjustment and bit changes; accuracy of a JessEm LiftTop plate machined from 3/4-inch thick solid phenolic. Includes 1-1/2-inch tab-loc insert ring, insert ring wrench, starter pin, hex key, and hardware. Works for 1.75- to 2.5 HP fixed base router motors. 

NEW DOUBLE SEALED BALL BEARING CONSTRUCTION!

We wanted our new Rout-R-Lift II to be as smooth as our new Mast-R-Lift II while raising and lowering your Lift. We decided to add a double sealed bearing to the spindle making it very smooth. This provides a lifetime of use for your Lift and even with the router installed your Lift can be raised and lowered with one finger.

BEARING THE LOAD!

The shafts on the Rout-R-Lift II, like all our Router Lifts, are pressed into a shaft mount with hydraulic pressure. We don’t just thread our shafts to the top plate. The owner of JessEm spent many years as a Tool and Die maker before founding our company, and cutting corners was not an option. By pressing the shafts into a larger diameter mount we are able to attach the shafts to the top plate and fasten in place with more than one screw spreading the lateral load and providing a very rigid and durable mount that will withstand the toughest routing operations.

NO BENT WRENCHES!

Like our current Mast-R-Lift II, bit changes above the table was a must for all routers that work with this lift without the need for special bent wrenches.

CNC MACHINED

All the machined components on the Rout-R-Lift II are machined on one of our CNC machining centers at our Barrie, Ontario, Canada location. Even the crank handle on the Lift is machined out of solid bar stock.

BUILT IN SPINDLE LOCK

We decided to add a locking mechanism to our new Rout-R-Lift II as well for added security that your setting won't change while routing. This locking mechanism is actuated by the same handle used to raise and lower the lift for convenience.

 

WHAT YOU GET!

The Rout-R-Lift II comes with a 2" insert ring to reduce the size of the bit opening in the plate and the opening is large enough to accommodate a 3-1/2" diameter bit without an insert installed. Our Lifts and Plates all feature our Tab-Loc™ design insert rings which are another JessEm innovation that is common on many other manufacturers’ products today. We figure we must be doing something right if our competition follows our lead.

 

We invented the Lift because we too are woodworkers. Adjusting a router in a table mounted operation was very difficult to do accurately before the first Router Lift in 1999. Now we have developed a Lift with features, built in accuracy and ease of use that we would want ourselves and at a cost that every woodworker can afford. The Rout-R-Lift II is a precision piece of engineering that you will be proud to own and find use whenever you are in your work shop.

 
 
 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Copyright © 2017 - Viking Mountain Tool Works. All Rights Reserved.
1666 Jordan West Road Decorah, IA 52101 | Phone: 563-387-7315 | E-mail: sales@vmtw.com