iVAC 4MBG 4'' Metal Blast Gate. Automated Dust Control

iVAC 4MBG 4'' Metal Blast Gate. Automated Dust Control
Brand: IVAC
Product Code: MBG-04-NA
Availability: Out Of Stock
Price: $230.00
Qty:     - OR -   Add to Wish List
Add to Compare

iVAC MBG-04-NA 4'' Metal Blast Gate. Automated Dust Control


iVAC 4'' Metal Blast Gate MBG-04-NA: Dust Collection


Blast Gate provides:

Automatic opening and closure of the dust extraction port from a power tool.

When controlled by either a wireless rf connection from an iVAC Pro Product or from a ‘Manual Wired Remote’.


The iVAC Pro Blast Gates are electrically driven Automatic Blast gates.

They are intended to be installed between the dust exhaust of a  power tool and the main dust collector ducting to a dust collector.

The Blast Gates are powered from a UL/CSA approved AC to AC adaptor.


There are three methods of controlling the Blast Gate.

a )            Fully Automatic from a power tool on an iVAC Pro System.

When the power tool turns on, the iVAC Pro Tool will issue a wireless command instructing the Blast Gate to open. When the power tool turns off it will instruct  the Blast Gate to close.


b )             Wireless Remote from an iVAC Pro Remote.

In this mode an iVAC Pro Remote is used to send the Open and Close commands to the Pro Blast Gate.


c )            Manually Remote from a ‘Manual Wired Remote’

In this mode the operation of the toggle switch on the ‘Manual Wired Remote’ cable will instruct the Blast Gate to open or close.

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:

Copyright © 2019 - Viking Mountain Tool Works. All Rights Reserved.
1666 Jordan West Road Decorah, IA 52101 | Phone: 563-387-7315 | E-mail: scott@vmtw.com